WOOD /WOODEN ENTRIES 10-1...WOOD /WOODEN CHAT 10-17th...CHAT-METAL MACRO-Weekly C...What annoyed you today?CHAT-PRODUCT SHOT-Weekly ...ENTRIES-METAL MACRO-Weekl...POLL for PRODUCT SHOTENTRIES-PRODUCT SHOT-Week...POLL - ENJOYMENTWe need a laugh.ENJOYMENT ENTRIES - 21/12...1Dx Mk3ENJOYMENT CHAT - 21/12/2...Infra red photographyNew Years ResolutionsPOLL - CHRISTMAS

Author Topic: modelling lamps  (Read 1588 times)

Offline nickt

  • Full Member
  • ***
  • Posts: 217
    • nick.thompson photography
modelling lamps
« on: January 18, 2011, 07:10:57 PM »
Is it possible to use a normal lamp as a modelling lamp. I've just bought an Interfit studio kit and one of the modelling lamps has blown. Jessops are getting me a new lamp, but I thought if I can get a normal 100w ses lamp, will it do?

Nick



Offline Malcolm1938

  • Full Member
  • ***
  • Posts: 205
Re: modelling lamps
« Reply #1 on: January 18, 2011, 10:55:23 PM »
The colour temperature will be different and may cause White Balance problems. I worked for many years using 150W lamps but that was with B&W Film. You could try using ordinary bulbs in both lamps and making an adjustment for white balance.
Malcolm
FKA CannOffice
Too old to die young
Every day is a good day - if you wake up....

My Gallery

Offline nickt

  • Full Member
  • ***
  • Posts: 217
    • nick.thompson photography
Re: modelling lamps
« Reply #2 on: January 18, 2011, 11:52:26 PM »
I thought the colour temperature might have been a problem. I'll wait 'till Jessops gets the lamp in. Thanks for your reply.

Nick

Offline Jonathan

  • Hero Member
  • *****
  • Posts: 1273
    • PeopleByRyan
Re: modelling lamps
« Reply #3 on: January 19, 2011, 07:50:54 AM »
Dunno really - never tried it.

But although the whibal will be different it shouldn't cause a problem.  Either the lights will shut off the modelling lamps when the flash goes off (some do) or they will be so insignificant they won't make a difference.

E.g. set up your flash ready to take a picture and make sure it's decently exposed by the flash.  Turn flash off and modelling lights on, leave the exposure the same and take a picture.  What do you see....?
It's Guest's round

Offline Malcolm1938

  • Full Member
  • ***
  • Posts: 205
Re: modelling lamps
« Reply #4 on: January 19, 2011, 08:45:50 AM »
Silly me - I forgot about the flash and thought the exposure was being made using the lamps.  Of course it would make no difference if you are using the highest sync speed on your camera and exposing with flash. It's worth a try anyway because the bulb will be cheaper. You may find that the dimming of the modelling lamp is not consistent when using lower power and most longlife type bulbs dont work properly with dimming circuits.

Malcolm
FKA CannOffice
Too old to die young
Every day is a good day - if you wake up....

My Gallery

Offline nickt

  • Full Member
  • ***
  • Posts: 217
    • nick.thompson photography
Re: modelling lamps
« Reply #5 on: January 19, 2011, 09:19:45 PM »
The lamps do add to the exposure. I might just get some lamps and see what happens. Thanks for your replies.

Nick

 

latest Posts

Subject Board Views/Replies Member Date & Time
xx WOOD /WOODEN ENTRIES 10-17th January 2021 International Weekly Comp Entries 91/3 Jediboy Last post Today at 12:01:28 PM
xx WOOD /WOODEN CHAT 10-17th January 2021 International Weekly Comp Entries 111/3 Hinfrance Last post Today at 10:48:01 AM
xx CHAT-METAL MACRO-Weekly Comp 17-24/1/21 International Weekly Comp Entries 80/4 jinky Last post Today at 10:07:42 AM
xx What annoyed you today? General Discussion 673666/4019 Mick Last post Today at 12:20:55 AM
xx CHAT-PRODUCT SHOT-Weekly Comp 3/1-10/1/21 International Weekly Comp Entries 274/8 Jediboy Last post January 17, 2021, 02:06:14 PM
xx ENTRIES-METAL MACRO-Weekly Comp 17-24/1/21 International Weekly Comp Entries 31/0 Hinfrance Last post January 17, 2021, 08:57:09 AM
xx POLL for PRODUCT SHOT International Weekly Comp Entries 236/4 Jediboy Last post January 16, 2021, 07:08:40 PM
xx ENTRIES-PRODUCT SHOT-Weekly Comp 3/1-10/1/21 International Weekly Comp Entries 252/4 Jediboy Last post January 11, 2021, 09:24:19 PM